AOPEN I915GA-HFS MARVELL GIGABIT LAN DRIVER DETAILS:
|File Size:||9.6 MB|
|Supported systems:||Windows XP (32/64-bit), Windows Vista, Windows 7, Windows 8.1, Windows 10|
|Price:||Free* (*Free Registration Required)|
AOPEN I915GA-HFS MARVELL GIGABIT LAN DRIVER
Overclocking refers to running a component at a speed greater than it was designed for. This gives enhanced performance but often at the expense of decreased stability.
This site maintains listings of network Aopen i915Ga-HFS Marvell Gigabit LAN available on the web, organized by company. Includes links to useful resources. PC maintenance article - It s a brush based fan, which means it makes noise -particularly when it s cold at bootup. Some also want to replace it to get better cooling.
The most common way of doing this for most chipsets is to use a Blue Orb chipset cooler. To start the mod, I removed the old fan.
AOPEN i915Ga-HFS Manual
You have to be careful when taking it off, because the back of the board has a lot of leads which can be scratched easily. Just use a needle nose pliers to clamp the plastic and push it through the hole. The fan will then remove with Aopen i915Ga-HFS Marvell Gigabit LAN.
Be careful not to scratch the leads on the back of the board I was surprised to find that Abit actually used thermal compound although a very small amount between the Aopen i915Ga-HFS Marvell Gigabit LAN fan and the Northbridge. I didn t think there would be any kind of material there at all. Not much thermal compound Then I attached the Blue Orb. I soon found out that the Blue Orb does not fit on the KT7.
Download Aopen iGa-HFS Marvell Gigabit LAN Driver for Windows 2K, Windows XP
Because of this, the Blue Orb is short by about half a centimeter. I tried bending it and forcing it on the board for about thirty minutes to no avail. There is simply no possible way to get it to fit.
Of course you can juse use thermal tape on the bottom without clamping the unit down, but this defeats the purpose of getting the added cooling of the Blorb. I then tried to mount the Aopen i915Ga-HFS Marvell Gigabit LAN Orb s fan on the KT7 s heatsink, since it was obvious the Blorb s fan was a tad better. This also was impossible to accomplish without some serious modification.
The screws just don t line up, and it s impossible to force the screws into the heatsink believe me I tried. Mounting the fan on the KT7 s heatsink won t work It is a good idea to take off Aopen i915Ga-HFS Marvell Gigabit LAN current heatsink and fan on the KT7 s Northbridge.
AOpen i915Ga-HFS ATX Pentium M Motherboard
Abit didn t use very much thermal paste at all. It s a good idea to take it off and put a new thin layer of paste over the chip. It s possible this could further increase stability of the board, possibly allowing you to raise the FSB higher. Since users have asked exactly how to remove the BIOS chip from the board, I have put together a short Aopen i915Ga-HFS Marvell Gigabit LAN guide. The BIOS chip is located on the bottom left of the board. The writing on the chip not the sticker reads from the LEFT corner of the board - remember this when you put it back in.
Feature The world s first ATX Pentium M motherboard -- iGa-HFS. The motherboard integrates Socket Pentium M (Dothan) CPU.
|Toshiba Satellite L350D TS-L633P ODD||E6600(OEM) on P5B Dlx Overclocking|
|Asus P2-M3A3200 Realtek ALC1200 Audio||Network Card OTHER NETWORK CARDS Drivers|
|Albatron PXP965 Realtek LAN||Estatísticas|
|3Dfx Vodoo 3 3000||Free Driver Downloads, Safe Download|
AOpen reserves the right to revise all the specifications and information contained in this Marvell PCIe Gigabit LAN Chip. CD_IN Connector. iGa-HFS.